**FREE SHIPPING within continental U.S.**
THE RACE IS OVER. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS For corner installations in box stalls–but can be installed outdoors as well. Stainless steel access plates. Foam filled-R value of 7.5 per inch. Fill valve delivers about 2 1/2 gallons (9.5 liters) per minute; simple water level adjustment, easy to clean.Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Optional heater, 250 watts, 110 volts. We tested this unit in our own cold chamber. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). No freezing occurred at this temperature-even after 7 days!
Heating cost is minimal-less than $10.00 per heating season.
Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations available in light gray.
Double wall, single piece poly construction — ALL SMOOTH!
Internal 3/4″ (1.9 cm) AND external 2″ (5.1 cm) drains; drinker is very easy to clean-no disassembly for cleaning required.
15 1/2″ x 15 1/2″x 12″ High